nut slot height
Nut height?
nut slot height
website nut slot height The height of the strings above the 1st fret should be as low as possible to not buzz and the 4 strings should be the same height above the fret nuts and bolts slot The permanent way to fix it is to superglue a strip of wood veneer on the underside of the nut and then carefully sand it down until there is a
nut slot height The G0's nut slots are deeper Therefore, only a bit of the low E string is sitting above the nut There is about 1mm at the nut between bottom Ideally, the string sits in a slot about half the height of the string If the slot is deeper than that, some material can come off the top You mean nut slots height ? With 3rd fret pressed, there should barely be any space over first fret Paper thin How to mark it ? The half